Single Crystal Research Articles

Solid-Emission-Tunable Squaraine with Thermal-Promoted Aggregate-State Transitions for Fast Thermal History Sensing.

Determining thermal history is crucial in many industrial processes, but reliable and sensitive organic thermal history indicators are currently absent. Herein, we report on the development of a squaraine-based fluorescent molecule, DPEA-SQ, for the detection of thermal exposure histories up to 436 K. DPEA-SQ forms multiple single crystals (DPEA-SQ-I, DPEA-SQ-II, and DPEA-SQ-III) with different conformations and aggregate-state packing modes, contributing to their different fluorescence wavelengths, lifetimes, and efficiencies. Interestingly, DPEA-SQ-I and DPEA-SQ-III undergo aggregate-state structural transitions to form the thermodynamically more stable DPEA-SQ-II, which are accompanied by changes in their fluorescence. By taking advantage of similar aggregate-state structural transformations during heating, a high-temperature thermal exposure history of up to 436 K is recorded and reflected by their fluorescence. To demonstrate the potential practical applications of DPEA-SQ, a DPEA-SQ-Powder/PDMS film is prepared and coated on an electric circuit board, which enables real-time monitoring of localized overheating by the naked eye. Additionally, the fluorescence peaks of DPEA-SQ-Powder and DPEA-SQ-Powder/PDMS films remain unchanged after storage at 373 K for 52 days, demonstrating high aggregate-state stability. The fast and reliable responses of this system make it an excellent candidate for the detection of overtemperature traces in electronic components and circuit diagnosis.

Biomineral crystallographic preferred orientation in Solenogastres molluscs (Aplacophora) is controlled by organic templating

Aplacophoran molluscs are shell-less and have a worm-like body which is covered by biomineralized sclerites. We investigated sclerite crystallography and the sclerite mosaic of the Solenogastres species Dorymenia sarsii, Anamenia gorgonophila, and Simrothiella margaritacea with electron-backscattered-diffraction (EBSD), laser-confocal-microscopy and FE-SEM imaging. The soft tissue of the molluscs is covered by spicule-shaped, aragonitic sclerites. These are sub-parallel to the soft body of the organism. We find, for all three species, that individual sclerites are untwinned aragonite single crystals. For individual sclerites, aragonite c-axis is parallel to the morphological, long axis of the sclerite. Aragonite a- and b-axes are perpendicular to sclerite aragonite c-axis. For the scleritomes of the investigated species we find different sclerite and aragonite crystal arrangement patterns. For the A. gorgonophila scleritome, sclerite assembly is disordered such that sclerites with their morphological, long axis (always the aragonite c-axis) are pointing in many different directions, being, more or less, tangential to cuticle surface. For D. sarsii, the sclerite axes (equal to aragonite c-axes) show a stronger tendency to parallel arrangement, while for S. margaritacea, sclerite and aragonite organization is strongly structured into sequential rows of orthogonally alternating sclerite directions. The different arrangements are well reflected in the structured orientational distributions of aragonite a-, b-, c-axes across the EBSD-mapped parts of the scleritomes. We discuss that morphological and crystallographic preferred orientation (texture) is not generated by competitive growth selection (the crystals are not in contact), but is determined by templating on organic matter of the sclerite-secreting epithelial cells and associated papillae.

Predicted Fracture Tendency of Naturally Occurring Aluminum Surface Coatings under Tensile Loading.

Naturally occurring coatings on aluminum metal, such as its oxide or hydroxide, serve to protect the material from corrosion. Understanding the conditions under which these coatings mechanically fail is therefore expected to be an important aspect of predictive models for aluminum component lifetimes. To this end, we develop and apply a molecular dynamics (MD) modeling framework for conducting tension tests that is capable of isolating factors governing the mechanical strength as a function of coating chemistry, defect morphology, and variables associated with the loading path. We consider two representative materials, including γ-Al2O3 and γ-Al(OH)3 (i.e., oxide and hydroxide), both of which form readily as aluminum surface coatings. Our results indicate that defects have a significant bearing on the strength of aluminum oxide, with grain boundaries serving to reduce the strain at failure from εzz = 0.300 to 0.219, relative to perfect single crystal. Our simulations also predict that porosity lowers the elastic stiffness and yield strength of the oxide. Relative to perfect crystal, we find porosity factors of 5%, 10% and 20% decrease the yield stress by 26%, 36% and 53%, respectively. MD predicts that perfect hydroxide and oxide single crystal have respective strains at failure of 0.08 and 0.31 under tensile uniaxial strain loading, and that the corresponding yield stresses are respectively 1.6 and 11.1 GPa. These data indicate that the hydroxide is substantially more susceptible to mechanical failure than the oxide. Our results, coupled with literature findings that indicate hot and humid conditions favor formation of hydroxide and defective oxide coatings, indicate the potential for a complicated dependence of aluminum corrosion susceptibility and stress corrosion cracking on aging history.

Synthesis and Optical Property Modulation of Substituted [2.2]Paracylophanes through Through‐Space Conjugation

4,16‐para‐substituted [2.2]paracylophane with naphthalene (PCP⎼NAP), anthracene (PCP⎼ANTH), and tetraphenylethylene (PCP⎼TPE), as new through‐space conjugated dimers, were prepared by the Suzuki–Miyaura cross‐coupling reaction of 4,16‐diboryl[2.2]paracyclophane and the corresponding bromo derivative using Pd(PPh3)4 as a catalyst and KOH as a base. The synthesized compounds were fully characterized by NMR and HR‐MS, and their photophysical and electrochemical properties were studied. The photoluminescence quantum yield of PCP⎼NAP, PCP⎼ANTH were determined to be 0.21, 0.50 and for PCP⎼TPE in aggregated state 0.31, respectively. PCP⎼TPE exhibited aggregation‐induced emission characteristics when the water fraction was greater than 50% in THF/water mixtures. PCP⎼ANTH and PCP⎼TPE were also characterized by X‐ray crystallography, and single crystals of PCP⎼ANTH were obtained from the centrosymmetric monoclinic space group C2/c. A single crystal of PCP⎼TPE crystallizes in the centrosymmetric triclinic space group P⎼1, with one molecule residing at the inversion center. The observed properties of these π‐stacked dimers were compared with respect to through‐space conjugation and conjugation length in the structure.

Study of rutile TiO2(110) single crystal by transient absorption spectroscopy in the presence of Ce4+ cations in aqueous environment. Implication on water splitting.

Ce4+ cations are commonly used as electron acceptors during the water oxidation to O2 reaction over Ir- and Ru-based catalysts. They can also be reduced to Ce3+ cations by excited electrons from the conduction band of an oxide semiconductor with a suitable energy level. In this work, we have studied their interaction with rutile TiO2(110) single crystal upon band gap excitation by femtosecond transient absorption spectroscopy (TAS) in solution in the 350-900 nm range and up to 3.5 ns. Unlike excitation in the presence of water alone the addition of Ce4+ resulted in a clear ground-state bleaching (GSB) signal at the band gap energy of TiO2 (ca. 400 nm) with a time constant t = 4-5 ps. This indicated that the Ce4+ cations presence has quenched the e-h recombination rate when compared to water alone. In addition to GSB, two positive signals are observed and are attributed to trapped holes (in the visible region, 450-550 nm) and trapped electrons in the IR region (> 700 nm). Contrary to expectation, the lifetime of the positive signal between 450 and 550 nm decreased with increasing concentrations of Ce4+. We attribute the decrease in the lifetime of this signal to electrostatic repulsion between Ce4+ at the surface of TiO2(110) and positively charged trapped holes. It was also found that at the very short time scale (<2-3 ps) the fast decaying TAS signal of excited electrons in the conduction band is suppressed because of the presence of Ce4+ cations. Results point out that the presence of Ce4+ cations increases the residence time (mobility) of excited electrons and holes at the CB and VB energy levels (instead of being trapped). This might provide further explanations for the enhanced reaction rate of water oxidation to O2 in the presence of Ce4+ cations.&#xD.

A Gold(I)-Acetylene Complex Synthesised using Single-Crystal Reactivity.

Using single-crystal to single-crystal solid/gas reactivity the gold(I) acetylene complex [Au(L1)(η2-HC≡CH)][BArF4] is cleanly synthesized by addition of acetylene gas to single crystals of [Au(L1)(CO)][BArF4] [L1 = tris-2-(4,4'-di-tert-butylbiphenyl)phosphine, ArF = 3,5-(CF3)2C6H3]. This simplest gold-alkyne complex has been characterized by single crystal X-ray diffraction, solution and solid-state NMR spectroscopy and periodic DFT. Bonding of HC≡CH with [Au(L1)]+ comprises both σ-donation and π-backdonation with additional dispersion interactions within the cavity-shaped phosphine.

Analysis of defects dominating carrier recombination in CeO2 single crystal for photocatalytic applications

In photocatalytic water splitting and CO2 reduction, recently, cerium oxide (CeO2) has been widely investigated. Defects that can directly dominate carrier recombination are essential for the photocatalytic performance of CeO2. In this study, several photoluminescence (PL) peaks are observed on the (100) face of an undoped CeO2 single crystal, indicating the presence of defects. Moreover, we characterize carrier recombination using time-resolved photoluminescence (TR-PL) and microwave photoconductivity decay (μ-PCD) measurements. The temperature dependence of decay curves is the result of carrier trapping and emission at deep levels. These decay curves are observed separately using a 565 nm band-pass filter (BPF) based on the PL spectra. The trap energy level ( ET ) and majority carrier capture cross-section ( σT ) of each defect are also analyzed using rate equations to fit the experimental results. The temperature-dependent time constants are well reproduced by a recombination model using hole traps HTinfrared and HTvisible at ET of 0.76 and 0.55 eV from the conduction or valence band, with estimated σT of the order of 10−21 and 10−22 cm2 for without and with the BPF, respectively. These findings regarding the presence of multiple defects in a single crystal indicate the necessity to focus on defect control.

A Gold(I)–Acetylene Complex Synthesised using Single‐Crystal Reactivity

Using single‐crystal to single‐crystal solid/gas reactivity the gold(I) acetylene complex [Au(L1)(η2‐HC≡CH)][BArF4] is cleanly synthesized by addition of acetylene gas to single crystals of [Au(L1)(CO)][BArF4] [L1 = tris‐2‐(4,4’‐di‐tert‐butylbiphenyl)phosphine, ArF = 3,5‐(CF3)2C6H3]. This simplest gold‐alkyne complex has been characterized by single crystal X‐ray diffraction, solution and solid‐state NMR spectroscopy and periodic DFT. Bonding of HC≡CH with [Au(L1)]+ comprises both σ‐donation and π‐backdonation with additional dispersion interactions within the cavity‐shaped phosphine.

Shaping single crystalline BaTiO3 nanostructures by focused neon or helium ion milling.

The realization of perovskite oxide nanostructures with controlled shape and dimensions remains a challenge. Here, we investigate the use of helium and neon focused ion beam (FIB) milling in an ion microscope to fabricate BaTiO3 nanopillars of sub-500 nm diameter from BaTiO3 (001) single crystals. Irradiation of BaTiO3 with He ions induces the formation of nanobubbles inside the material eventually leading to surface swelling and blistering. Ne FIB is shown to be suitable for milling without inducing surface swelling. The resulting defect-free single crystal nanostructures are enveloped by a neon-rich amorphous and a point defect-rich crystalline layers both on top and lateral sides. The amorphous shell can be selectively removed by dipping the nanostructures in diluted HF. The geometry and beam-induced damage of the milled nanostructures depend strongly on the patterning parameters and can be well controlled. Ne ion milling is shown to be an effective method to rapidly prototype BaTiO3 crystalline nanostructures.

Effect of Dual-Organic Cations on the Structure and Properties of 2D Hybrid Perovskites as Scintillators.

Two-dimensional (2D) hybrid organic-inorganic perovskite (HOIP) crystals show promise as scintillating materials for wide-energy radiation detection, outperforming their three-dimensional counterparts. In this study, we synthesized single crystals of (PEA2-xBZAx)PbBr4 (x ranging from 0.1 to 2), utilizing phenethylammonium (C6H5CH2CH2NH3+) and benzylammonium (C6H5CH2NH3+) cations. These materials exhibit favorable optical and scintillation properties, rendering them suitable for high light yield (LY) and fast-response scintillators. Our investigation, employing various techniques such as X-ray diffraction (XRD), photoluminescence (PL), time-resolved (TR) PL, Raman spectroscopy, radioluminescence (RL), thermoluminescence (TL), and scintillation measurements, unveiled lattice strain induced by dual-organic cations in powder X-ray diffraction. Density functional theory analysis demonstrated a maximal 0.13 eV increase in the band gap with the addition of BZA cation addition. Notably, the largest Stokes shift of 0.06 eV was observed in (BZA)2PbBr4. The dual-organic cation crystals displayed >80% fast component scintillation decay time, which is advantageous for the scintillating process. Furthermore, we observed a dual-organic cations-induced enhancement of electron-hole transfer efficiency by up to 60%, with a contribution of >70% to the fast component of scintillation decay. The crystal with the lowest BZA concentration, (PEA1.9BZA0.1)PbBr4, demonstrated the highest LYs of 14.9 ± 1.5 ph/keV at room temperature. Despite a 55-70% decrease in LY for BZA concentrations >5%, simultaneous reductions in scintillation decay time (12-32%) may work for time-of-flight positron emission tomography and photon-counting computed tomography. Our work underscores the crucial role of dual-organic cations in advancing our understanding of 2D-HOIP crystals for materials science and radiation detection applications.

Perspective on High-Stability Single-Crystal Li-Rich Cathode Materials for Li-Ion Batteries.

Benefiting from anionic and cationic redox reactions, Li-rich materials have been regarded as next-generation cathodes to overcome the bottleneck of energy density. However, they always suffer from cracking of polycrystalline (PC) secondary particles and lattice oxygen release, resulting in severe structural deterioration and capacity decay upon cycling. Single-crystal (SC) design has been proven as an effective strategy to relieve these issues in traditional Li-rich cathodes with PC morphology. Herein, we first reviewed the main synthesis routes of SC Li-rich materials including solid-state reaction, molten salt-assisted, and hydrothermal/solvothermal methods, in which the differences in grain morphology, electrochemical behaviors, and other properties induced by various routes were analyzed and discussed. Furthermore, the distinct characteristics were compared between SC and PC cathodes from the aspects of irreversible capacity, structural stability, capacity/voltage degradation, and gas release. Besides, recent advances in layered SC Li-rich oxide cathodes were summarized in detail, where the unique structural designs and modification strategies could greatly promote their structural/electrochemical stability. At last, challenges and perspectives for the emerging SC Li-rich cathodes were proposed, which provided an exceptional opportunity to achieve high-energy-density and high-stability Li-ion/metal batteries.

Investigations on Growth, Characterization, NCI-RDG, AIM, Molecular Docking and In-Silico ADME Properties of 1,2-Benzene Dicarboxylic Acid Anhydride

Superior single crystal of 1,2-benzene dicarboxylic acid anhydride additionally called Phthalic anhydride (PAN) was developed via solution growth at low temperatures. Single crystal X-ray diffraction investigation revealed the crystal system and unit cell characteristics. The phase stability and crystalline nature were uncovered by powder X-ray diffraction analysis. FT-IR examination was done for the titular material so as to survey the various functional groups. With the use of the VEDA program's relevant resources, vibrational assignments have been made on the concept of Potential Energy Distribution (PED). Density Functional Theory (DFT) was employed to smooth out the molecular structure of PAN and was additionally utilized to consider FT-IR spectrum at molecular level.  Non covalent interactions reduced density gradient (NCI-RDG) analysis has been used for the prediction of the weak interaction in the actual space in terms of the electron density along with its derivatives for PAN. Atoms in Molecules (AIM) analysis was carried for out for PAN. The docking research of the small molecule (PAN) with target protein confirmed that this is a great molecule which docks nicely with numerous targets associated with Hypoxia Inducible Factor 1-α. The absorption, distribution, metabolism, excretion (ADME) characteristics have been calculated with the assist of online server preADMET.

High‐performance Pyroelectric Property Accompanied by Spin Crossover in a Single Crystal of Fe(II) Complex

AbstractPyroelectric materials hold significant potential for energy harvesting, sensing, and imaging applications. However, achieving high‐performance pyroelectricity across a wide temperature range near room temperature remains a significant challenge. Herein, we demonstrate a single crystal of Fe(II) spin‐crossover compound shows remarkable pyroelectric properties accompanied by a thermally controlled spin transition. In this material, the uniaxial alignment of polar molecules results in a polarization of the lattice. As the molecular geometry is modulated during a gradual spin transition, the polar axis experiences a colossal thermal expansion with a coefficient of 796×10−6 K−1. Consequently, the material's polarization undergoes significant modulation as a secondary pyroelectric effect. The considerable shift in polarization (pyroelectric coefficient, p=3.7–22 nC K−1cm−2), coupled with a low dielectric constant (ϵ′=4.4–5.4) over a remarkably wide temperature range of 298 to 400 K, suggests this material is a high‐performance pyroelectric. The demonstration of pyroelectricity combined with magnetic switching in this study will inspire further investigations in the field of molecular electronics and magnetism.

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La3Ni2O7

AbstractRecently, superconductivity at high temperatures is observed in bulk La3Ni2O7−δ under high pressure. However, the attainment of high‐purity La3Ni2O7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La3Ni2O7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La3Ni2O7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni2+/Ni3+ in Sr‐doped La3Ni2O7, aligning them with those of “La3Ni2O7.05”, thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La3Ni2O7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La3Ni2O7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La3Ni2O7−δ, despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

Synthesis and fluorescence properties of a two-dimensional Cd-complex for the ratiometric fluorescence detection of Zn2+ ions

The two-dimensional complex [Cd3(L)(2,2′-bpy)2]n (1) was synthesized solvothermally from 4,5-di(3,5-dicarboxylphenoxy)phthalic acid (H6L) and 2,2′-bipyridine (2,2′-bpy) and fully characterized by elemental analysis, infrared spectroscopy, single crystal and powder X-ray diffraction. Complex 1 displays high stability in water and resistance towards acidic and basic media. Fluorescence studies revealed that it may be acted as a ratiometric fluorescence probe to detect Zn2+ ions in water with a superior detection limit of 3.48 nM. The fluorescence recognition mechanism stems from weak interactions between Zn2+ ions and complex 1. Its pronounced stability and recyclability suggest that the new material may be used for high-precision detection of Zn2+ ions in real-life aqueous samples, even under acidic and basic conditions.

Transparent, low dark current, fast response ultraviolet and short-wavelength blue photons photodetector based on Graphene/SrTiO3 single crystal

Transparent, low dark current, fast response ultraviolet and short-wavelength blue photons photodetector based on Graphene/SrTiO3 single crystal

Insights into luminescence and energy transfer processes in Ce3+- and Tb3+ co-doped (Gd, Y)3Al2Ga3O12 garnet single crystals

Insights into luminescence and energy transfer processes in Ce3+- and Tb3+ co-doped (Gd, Y)3Al2Ga3O12 garnet single crystals

Optofluidic crystallithography for directed growth of single-crystalline halide perovskites

Crystallization is a fundamental phenomenon which describes how the atomic building blocks such as atoms and molecules are arranged into ordered or quasi-ordered structure and form solid-state materials. While numerous studies have focused on the nucleation behavior, the precise and spatiotemporal control of growth kinetics, which dictates the defect density, the micromorphology, as well as the properties of the grown materials, remains elusive so far. Herein, we propose an optical strategy, termed optofluidic crystallithography (OCL), to solve this fundamental problem. Taking halide perovskites as an example, we use a laser beam to manipulate the molecular motion in the native precursor environment and create inhomogeneous spatial distribution of the molecular species. Harnessing the coordinated effect of laser-controlled local supersaturation and interfacial energy, we precisely steer the ionic reaction at the growth interface and directly print arbitrary single crystals of halide perovskites of high surface quality, crystallinity, and uniformity at a high printing speed of 102 μm s−1. The OCL technique can be potentially extended to the fabrication of single-crystal structures beyond halide perovskites, once crystallization can be triggered under the laser-directed local supersaturation.

Dual purpose of divalent metal ions (Cu2+, Zn2+, and Mg2+) doped 4-nitrophenyl hydrazone single crystals: a second order and third order NLO applications

Dual purpose of divalent metal ions (Cu2+, Zn2+, and Mg2+) doped 4-nitrophenyl hydrazone single crystals: a second order and third order NLO applications

Orientation-dependent deformation mechanisms of alpha-uranium single crystals under shock compression

Orientation-dependent deformation mechanisms of alpha-uranium single crystals under shock compression